manualshive.com logo in svg

Air Live AIRMAX5, User Manual, Page: 30 / 183

Share
Download
Air Live AIRMAX5 User Manual Download Page 30

3. Configuring the AirMax5 

 

 

 

23 

                       

AirLive AIRMAX5 User’s Manual

 

 

 

Secured Web Management (HTTPS):

  HTTPS is also using web browser for 

configuration.  But all the data transactions are securely encrypted using SSL 
encryption.  Therefore, it is a safe and easy way to manage your AirMax5.  We 
highly recommend WISP and service provider to use HTTPS for management.     

 

 

To begin, simply enter 

https://192.168.1.1

 on your web browser.    A security alert 

screen from your browser will pop up.    Please grant all permission and get certificate 
to AirMax5.    After you pass the security warning screen, you will enter the AirMax5’s 
secured web management interface.    The default password is “airlive”.   

 

 
 
 

For more information about Web Management and HTTPS, please make sure to 
read through “Introduction to Web Management” in this chapter, Chapter 4, 
and Chapter 5

 

Summary of Contents for AIRMAX5
























































































































































































Reviews:

No comments