manualshive.com logo in svg

Air Live AIRMAX5, User Manual, Page: 18 / 183

Share
Download
Air Live AIRMAX5 User Manual Download Page 18

2. Install the AirMax5 

 

 

11 

                       

AirLive AIRMAX5 User’s Manual

 

2.2 Package  Content 

The AIRMAX5 package contains the following items:   

„

 

One AIRMAX5 main unit

 

„

 

One 12V 1A DC power adapter

 

„

 

Passive PoE DC Injector

 

„

 

2 x Plastic Straps

 

„

 

User’s Guide CD

 

„

 

Quick Start Guide

 

 

 

 
 

The PoE Ethernet cable is not included in the package.    You may choose an outdoor 
specification Ethernet cable according to the length you need. 

 

2.3 Optional  Accessories 

The AirMax5 have the following optional accessories which you can purchase from AirLive 
 

„

 

Tilting Metal Wall/Pole Mount (

Model: WMK-AIRMAX

):    This kit allows your 

AirMax5 to tilt in pole mount, it also allow you to install the AirMax5 to the wall.

 

„

 

25 meter PoE cable (

Model:

 

OD-25M

): high quality outdoor graded anti-UI PoE 

Ethernet Cable.

 

 

 

Summary of Contents for AIRMAX5
























































































































































































Reviews:

No comments