manualshive.com logo in svg

Air Live AIRMAX5, User Manual, Page: 161 / 183

Share
Download
Air Live AIRMAX5 User Manual Download Page 161

12. Frequent Asked Questions 

 

 
 
 

 

AirLive AIRMAX5 User’s Manual 

154

Answer

:    AirMax5 currently only allow one user to manage the device at a time.   

Therefore, it will reject another IP logging in until the current administrator logout.   
If you need to force another administrator to logout, please type “login.asp” on 
your browser.    Then enter password again to enter the management interface. 

 

 
 

 
 
 
 

==================================================================== 
 
 

Question

:  

I heard AirMax5 can limit the bandwidth of BitTorrent and eDonkey traffic.    But 

I don’t see the option on the Bandwidth Control. 

 

Answer

:        The option to limit bandwidth by application or port is available only on WISP 

router and AP Router modes.

 

 

 

==================================================================== 
 
 

Question

:  

Where can I purchase the optional metal Mounting Kit? 

 

Answer

:        The part number for the mounting kit is “WMK-AIRMAX”.    Please ask your 

authorized AirLive distributor for availability.

 

 

 

 

==================================================================== 
 
 

Question

:  

How can I make connection with Mikrotik AP? 

 

Answer

:        The AirMax5 can connect with Mirkrotik AP using 

Client Infrastructure

 mode 

(support WEP, WPA-PSK, WPA2-PSK) and 

WDS Bridge mode

 (support 

WEP).    If using WEP, please choose “Static Key Required” on the Mirkrotik 
setting.    For step-by-step example, please visit AirLive.com’s support page at: 

http://www.airlive.com/support/support_1.jsp

.    Type “airmax5” at the support 

search. 

 

 

==================================================================== 
 
 

Question

:  

When I plug in the POE cable and power adapter, the AirMax5’s power LED is 

not on? 

https://192.168.1.1/login.asp 

Summary of Contents for AIRMAX5
























































































































































































Reviews:

No comments