manualshive.com logo in svg

Air Live AIRMAX5, User Manual, Page: 119 / 183

Share
Download
Air Live AIRMAX5 User Manual Download Page 119

7. Antenna Alignment 

 

 

AirLive AIRMAX5 User’s Manual 

112

 

 

 

7.4 Antenna Alignment using RSSI LED 

There are 2 LED indicators on the side of the AirMax5 that is dedicated to display the RSSI 
signal strength.    They are in bright blue and green color so you can see the difference in 
signal far away from the CPE.    By varying the states of the LED, the AirMax5 can display 4 
different levels of signal strength.       
 

About the Signal Threshold 

There are total of 4 signal levels in AirMax5: No Signal, Weak Signal, Strong Signal, Full 
Signal.    The Signal Threshold is the dividing line between 2 signal level.    For example; if 
the Full Signal Threshold is set to -50dB, -49dB will be Full Signal while -51dB will be 
Strong Signal. 
 
You can change the Signal Threshold by going to going to “

Operation Mode -> Setup -> 

RSSI LED Threshold

” menu.    The values indicated are the default threshold value. The 

correct value really depends on the TX output power of the remote AP.  These values are 
best for distance link about 2 kilometer with a remote AP of about 40dBm combined output 
power with antenna.    If the distance is greater or output power is lower, please reduce the 
threshold values. 

 

Summary of Contents for AIRMAX5
























































































































































































Reviews:

No comments