background image

Page 

30

 of 

30

 

 

15C0233-00 Rev A 

SSC4500DX 

9/23/2020 

12.0 Warranty 

GENERAL  
 

Air Innovations 

warrants, to the original buyer, its goods and all parts thereof to be free from defects in material and 

workmanship for one year from the date of invoicing assuming 

NORMAL USE AND SERVICE. 

 
LIABILITY  
 

Air Innovations 

liability shall be limited to the repair or replacement (at its option) of any part, which, at our sole 

discretion, is determined to be defective. The purchaser shall pay all transportation costs. Additionally, if a 
malfunction occurs within 90 days from the date of invoice, 

Air Innovations 

will reimburse the reasonable cost of 

labor required for the repair or replacement provided authorization is obtained from one of our authorized 
representatives prior to incurring any labor charges.  
 
LIMITATIONS OF LIABILITY  
 

THESE WARRANTIES ARE MADE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, 
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE 
AND IN LIEU OF ANY OTHER OBLIGATION OR LIABILITY, INCLUDING LIABILITY FOR ANY INCIDENTAL OR 
CONSEQUENTIAL DAMAGES. Air Innovations 

will not be responsible for any costs or liabilities whatsoever 

resulting from improper installation or service of its equipment. In the event that 

Air Innovations 

or its distributors are 

found liable for damage based on any defect or nonconformity in the products, their total liability for each defective 
product shall not exceed the purchase price of such defective product. Additionally, neither the repair nor the 
replacement of any part shall serve to renew or extend the original warranty period. No person or representative is 
authorized to change these warranties or assume any other obligations or liabilities for 

Air Innovations 

in connection 

with the sale of its systems.  
 
INDEMNIFICATION  
 
Purchaser agrees to indemnify, hold harmless and defend seller and its officers, directors, agents and employees 
from and against any and all claims, liabilities, costs and expenses arising out of or related to Purchaser’s use of the 
goods, or in any way involving injury to person or property or accident occasioned by the goods sold by 

Air 

Innovations 

to Purchaser.  

 
FOREIGN GOVERNMENT AND INDIAN NATIONS  
 
If Purchaser is a foreign government or an Indian nation, Purchaser hereby expressly waives its defense of sovereign 
immunity in the event of a dispute between Purchaser and 

Air Innovations 

regarding this invoice and Purchaser 

expressly acquiesces to the jurisdiction of the federal and state courts of the United States.  
 
SEVERABILITY  
 
If one or more of the provisions contained in this contract shall for any reason be held to be invalid, illegal or 
unenforceable in any respect, such invalidity, illegality or unenforceability shall not affect any other provision of this 
contract, but this contract shall be construed as if such invalid, illegal or unenforceable provision had never been 
contained.  
 
ADDITIONAL REQUIREMENTS  
 
If a defect covered by the Warranty occurs, contact 

Air Innovations 

for authorization to proceed with corrective 

action. Do not return any parts or incur any charges for which you expect to be reimbursed under this Warranty 
without receiving this authorization. If parts are replaced under this Warranty, the defective parts must be returned 
prepaid within 30 days. This Warranty shall be null and void in its entirety if the Serial Number on the air conditioner 
or compressor is altered, removed or defaced. 
 

Summary of Contents for SSC4500DX































Reviews: