4
Attaching Water Bottle
CAUTION: Always unplug the unit before removing the Water Bottle. Do not touch the
water in the reservoir.
1. Using any standard 16.9 fl oz water bottle (not provided) or if desired fill an empty 16.9 fl oz
water bottle with clean, cool, tap water. Do not use very cold water, since it may
temporarily reduce the mist output. Never fill with hot/warm water or add additives as this
could damage the unit and void your warranty.
2. Remove the cap of the bottle and place bottle on a flat surface.
3. Hold the bottle by the neck and start inserting the bottle adaptor at an angle.
4. Once the first threads are inside the bottle press the adaptor straight down until it
touches the bottle seal.
5. Turn the water bottle upside down and check the adaptor for leaks. If any water drips
from the outside edge, remove the adaptor and reinsert. Do not place the water bottle on
the Humidifier if the adaptor is leaking.
6. When placing the bottle on the cover, make sure the bottle adaptor snaps in place, so that
the bottle seats leveled and flush to the cover.
7. The water bottle is now fixed on the unit and the water will start to fill the water reservoir.
4
3
5
6
