Ensure the Water Tank is firmly seated on the
Base so there is no visible gap between Water
Tank and Base.
Use the Finger Lift to open the Water Tank Lid.
1
2
Filling The Water Tank
WARNING:
Never turn Water Tank upside down when full
.
WARNING: DO NOT use extremely cold water, since it may temporarily reduce the mist output.
WARNING: NEVER fill with hot/warm water or use additives as this could damage the unit and
void the warranty.
WARNING: If you have hard water use our Humidifier Demineralization Filters (available at www.
Air-Innovations.com) or use ONLY filtered/distilled water.
Fill the Water Tank using clean, cool water.
Note: Do not fill past the MAX fill line.
4
3
Close the Water Tank Lid. NOTE: DO NOT
block air holes as this will effect the performance of
the unit.
4
Close the Water Tank Lid.
5
Attach the Dual Directional Mist Nozzle to the top of the Water Tank. To easily control the direction of
the mist simply separate the Dual Directional Mist Nozzle and position as desired-see photo above.
Extension Nozzle – To convert this unit from a Tabletop unit to Floor unit simply remove the Dual
Directional Mist Nozzle from the top of the Water Tank. Position the unit on a flat, level surface and
insert the Extension Nozzle into the top of the Water Tank. Place the Mist Nozzle on top of the
Extension Nozzle.
