IMPORTANT
This spray gun should be operated only by an adequately trained operator, for safe use and maintenance of the equipment. Any
misuse or handling other than those indicated in this Instruction Manual is not covered by guarantee. AIR GUNSA disclaims all
responsibility for any accident or damage caused by failure to observe the operational and safety procedures as from this man-
ual. In the interest of user friendliness, this manual contains information in a brief and concise form.
For any additional information you may require regarding spray guns operations, or if any missing parts or any damage during
transportation is found, please contact your nearest AIR GUNSA Company (see last cover page).
IMPORTANT SPECIFICATIONS
Be sure to observe warnings and cautions in this instruction manual.
If not, it can cause paint ejection and serious bodily injury by drawing organic solvent.
Be sure to observe following marked items which are especially important.
WARNING
Indicates a potentially hazardous situation which, if not avoided, may result in serious injury or loss of life.
CAUTION
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or pro-
perty damage.
IMPORTANT
Indicates notes which we ask you to observe. The safety precautions in this instruction manual are the mini-
mum necessary conditions. Follow national and local regulations regarding fire prevention, electricity and
safety as well as your own company regulations.
TECHNICAL SPECIFICATIONS
Manufactured by:
AIR GUNSA _ Anest Iwata Gruop
This
AIR GUNSA
spray guns kit complies to ATEX regulations 94/9/EC, protection level:
II 2 G X Suitable for using Zones 1 and 2.
X marking: Any static electricity discharge from the spray gun is to be diverted to the ground via the conductive air hose as stipulated.
SPRAY GUN AZ30 HTE, AZ30 HTE M&S CUP
Before use, adjustment or maintenance, it is important to read this instruction manual very
carefully. This manual must be stored in a safe place for any future reference that may be necessary.
GB
ANEST IWATA Europe S.r.l.
46, Corso Vigevano
10155 Torino - Italy
Tel. ++39 011 24 80 868
Fax ++39 011 22 74 406
www.anest-iwataeu.com
e-mail: [email protected]
Instruction Manual
AIR GUNSA s.r.l.
46, Corso Vigevano
10155 Torino - Italy
Tel. ++39 011 24 80 868
Fax ++39 011 22 74 406
Quality Air Spray Guns Since 1944
www.anest-iwataeu.com/airgunsa
Distributed by:
Max. Pressure:
7.0 bar (100 PSI)
Max. Temperature:
Noise Level (LAeqT)
73.5 dB (A)
Atmosphere
5 ~ 40 °C
Spray conditions
Recommended condition in Tech. Specifications
Air and fluid
5 ~ 43 °C
Measuring point
1m backwards from gun, 1,6 m height
Air connection:
G 1/4”
Fluid connection:
G 1/4”
Model
Nozzle Orifice
Air Cap
(1)Atomizing
(2) Fluid
Air
Pattern
Weight
Weight
set Mark
Air pressure
Output
Consumption
Width
Without Cup
With Cup
Ø mm (in)
bar (PSI)
ml/min
Nl/min (cfm)
mm (in)
g (lbs)
g (lbs)
AZ30 HTE Gravity feed
AZ30 HTE 1.0
1.0 (0.039)
10 HP
80
245 (8.65)
150 (5.90)
AZ30 HTE 1.3
1.3 (0.051)
13 HP
175
245 (8.65)
225 (8.85)
AZ30 HTE 1.5
1.5 (0.059)
15 HP
220
250 (8.82)
260 (10.23)
AZ30 HTE 1.8
1.8 (0.070)
18 HP
280
270 (9.53)
325 (12.79)
AZ30 HTE 2.0
2.0 (0.079)
20 HP
315
270 (9.53)
350 (13.77)
490 (1.07)
600 cc CUP
640 (1.41)
------------
M&S CUP
664 (1.46)
2.5 (36)
Recommended condition
(1)
Atomizing air pressure means air pressure at gun inlet when trigger is pulled and air flows.
(2)
Paint viscosity; 21sec/Ford cup#4
