2
Unpacking & Installation Instructions
Remove the outer box and inspect for damage. Report all damage immediately to your carrier. If special
setup instructions are required, they will be taped to the outside of the equipment or in the “Operating”
section of this manual, available online.
Inspect all of the packing material for small parts before discarding packaging material. Report all damage
to Air-Care immediately. Any attempt at repairing damages may void warranty.
Check that all parts are present
(See Pages 6-7)
1.
COBRA-VI variable speed motor drive unit.
2.
Flexible drive cable, 3/8” core by 35 feet long.
3.
Flex-E-Bristle Brush, for use in 4” to 18” diameter air ducts.
4.
5 Button Wireless remote control handheld transmitter with 2-AA batteries installed.
5.
Commercial Option (12”-36” diameter Flex-E-Bristle Brush.)
Safety Precautions:
Always use safe and common sense precautions when working with Air-Care equipment. Do not block
walkways with equipment, and remove delicate and breakable articles from the immediate work area.
The following are precautions that should be reviewed by all persons who will be involved in the cleaning
activity.
•
There are no user serviceable components in the COBRA VI; only trained technicians should attempt
to make internal repairs on this equipment. Call Air-Care 800-322-9919 for tech Support.
•
Never use the COBRA-VI in a wet environment.
•
Always turn off the main power switch/Breaker on the COBRA-VI panel when the brush and cable
are laid down to prevent injury if the START switch is accidentally activated.
•
Be sure all power cords and electrical extensions are rated to meet or exceed the original Air-Care
power cord spec’s, and inspect AC power plugs to be sure the ground pin is in place.
•
Never connect power to Air-Care equipment unless all covers and safety shields are in place.
Mechanical and electrical parts could be activated and cause injury.
•
Never allow anyone but a properly trained technician to use Air-Care equipment or cleaning products.
•
All Air-Care equipment is designed for US standard 115 volt, 60 Hz AC. Most Air-Care equipment
can be special ordered to meet other worldwide standards for a reasonable price and delivery schedule.
Always check the specifications on the Equipment before connecting electrical power to Air-Care
equipment.
•
Keep the cable clear of breakable objects as it can flip and twist during higher torque applications.
•
Turn off main power switch when removing or replacing the Flex-E-Bristle Brush.
If you have questions about the safe use of any Air-Care product, call 702-454-5515
Equipment Specifications and part numbers are subject to and change without notice.
