51
Notes and Support
Replacing batteries
1
Remove the video door station
from the mounting frame
Loosen the locking screw of the bottom
section, pull out the bottom section of the
video door station
fi
rst and pull out the top
section.
2
Remove the battery cover
Battery cover
Loosen the two screws and remove the
battery cover.
3
Replace with six AA batteries
(batteries not included)
Align the plus (+) and minus (-) terminals
correctly.
4
Attach the battery cover
Tab
• Set the hooks of the upper section of
the battery cover and attach the battery
cover.
• Tighten the two screws.
• There is rubber packing attached to the
rear side of the battery cover. Make sure
that the rubber packing is not removed
during attachment.
5
Attach the video door station to
the mounting frame
Insert the top section of the video door station
into the mounting frame and push in the
bottom section. Tighten the locking screw on
the bottom to secure the video door station.
Replacing the battery of the video door station
