18
Door release
You can release the door while being called from,
communicating with, or monitoring a sub station if a door
release device is connected to the station.
Click
while being called from, communicating with, or
monitoring the sub station.
The door is released for the time set in the System setting on
the IP host unit.
*
is lit while the door is released.
If the set release time is “0”, it can be released while the
*
button is clicked and held if the target station is in your site.
If the target station is in a remote site, the release time is 10
*
seconds only when the release time is set to “0” at the target
site.
CAUTION:
Be sure to confi rm the visitor securely before releasing the door if the
sub station has no camera.
NOTES:
To enable door release to a door station in a remote site, the
•
appropriate setting must be made at the remote site.
This function is disabled during scan-monitoring. (
•
→
P. 26)
Using the PRIVACY function
The PRIVACY function of a PC master station prevents you from
being heard by other (PC) master stations in your site or remote
sites that call you.
To activate the PRIVACY function
Set “Privacy” to “Privacy 1” or “Privacy 2” in the Setting window.
If you will not use the PRIVACY function, set it to “OFF”.
(
→
“SETTING MANUAL”)
When set to “Privacy 1” or “Privacy 2”, the PRIVACY
*
button lights up.
■
While receiving a call
When the PRIVACY function is activated
•
The microphone of your PC master station is muted, so the
sounds at your side are not heard by the caller.
When the PRIVACY function is off
•
The microphone of your PC master station is enabled, so the
sounds at your side are heard by the caller.
■
To communicate with the caller
When th
•
e PRIVACY function is activated
Click
, and the microphone is enabled. Then you can
communicate with the caller.
When the PRIVACY function is off
•
You can communicate with the caller without clicking
.
The status of PC master station depending on the
PRIVACY mode
PRIVACY
mode
PRIVACY
LED
When receiving a call from
another (PC) master station
in your site or remote site
When communicating
with a sub station
1
Lit
The microphone is muted.
•
When you click
•
to answer the call, the
microphone is enabled.
Microphone is enabled.
•
The microphone is
•
muted while clicking
.
2
Lit
The microphone is muted.
•
When you receive a call from a
•
(PC) master station or remote
site, the caller and you are
noti
fi
ed by a tone that you are
in the PRIVACY mode. When
you click
to answer the
call, the microphone is enabled.
OFF
Off
The microphone is enabled.
•
Communication starts when a
direct voice call arrives from a (PC)
master station or remote site.
The micr
•
ophone is muted
while clicking
.
