Org
Brn
Yel
Grn
TONE
- INSTRUCTIONS -
The BA-1P Paging Adaptor allows paging to external speakers from the AP-M or MP-S series
master stations. For each zone of paging, use a BA-1P with the appropriate sized amplifier.
The BA-1P provides outgoing paging only. Talkback is not available.
WIRING DIAGRAM:
BA-1P
Paging Adaptor
Use with:
AP-M or MP-S Series Systems
Special
Order
Products
1
2
3
4
5
E
AP-5M
HOT
GND
OUTPUT
TO PAGING
SPEAKERS
TONE: Control to adjust the
paging volume
BA-1P
NOTES:
1. The above example shows station 5 accessing the paging
zone. Any unused station can be used for a paging zone.
2. The colored wires at each end of the BA-1P are the Input
and Output. Connect them to the intercom and amplifier as
shown.
3. Only wiring concerning the BA-1P is shown here. For
complete installation information see the system's
instruction manual.
4. The TONE control is located on the top of the BA-1P, and
requires a screwdriver for adjustment.
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA 98005
(425) 455-0510
FAX (425) 455-0071
TOLL FREE TECHNICAL SUPPORT:
(800) 692-0200
TOLL FREE FAX LINE:
(800) 832-3765
E-MAIL: [email protected]
BA-1P COLOR CODE DEFINITIONS:
Org:
Hot side of output
(Connect to amplifier input)
Brn:
Ground side of output
(Connect to amplifier input)
Yel:
Hot side of BA-1 input
(Connect to station # on master)
Grn:
Ground side of input
(Connect to "E" terminal on master)
SPECIFICATIONS:
Power Source: Supplied by master
Input:
8 ohms
Output:
10K ohms
Amplifier input
requirements: Aux input (10K ohms)
Dimensions:
4-1/8"H x 2-1/2"W x 1-1/2"D
BA-1P Instr.
0598bkjd
Amplifier
OUTPUT
INPUT
