manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 96 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 96

3-11

Chapter 3:  INSTALLATION & WIRING

3.2.2. AN-8011MS

The station can be mounted on a wall using an optional YC-290 Wall mounting bracket.
The YC-290 can be installed to a one-gang electrical box.

[Mounting example]

Step 1.

Install the YC-290 Wall mounting bracket to the wall.

Notes

• Use appropriate screws for the construction of wall.
• Wood screws 3.5 x 20 are supplied with the YC-290.
• No fitting screws for electrical box are supplied.

Use commercially available screws.

Step 2.

Hang the station on the Wall mounting bracket hook to install.
Push down the station main body in the direction indicated by the arrow.

YC-290 Wall mounting bracket

Station

Wall 
surface

Wood screw 3.5 x 20 
(supplied with the YC-290)

Hook

1

2

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments