manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 191 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 191

5-59

Chapter 5:  SYSTEM SETTINGS BY SOFTWARE

Step 5.

Press "OK".

Note

The status indicator located on the exchange, multi interface unit, or IP station remains lit during the
update process. Do not restart the system or turn off the power while this light is on.

7.2. Changing the Station Maintenance Password

Step 1.

Click "Password Change" on the initial screen to display "Password change" dialog.

Step 2.

Click "Station maintenance password" tab to display the Station maintenance password screen.

Step 3.

Enter the old password in the [Old password] entry box. 
Factory-preset: 0000

Step 4.

Enter a new password (four-digit number) in the [New password] entry box.

Step 5.

Enter the changed password entered in 

Step 4

in the [New password (reentry)] entry box for

confirmation.

Step 6.

Press "OK".

Note

The status indicator located on the exchange or IP station remains lit during the update process. Do
not restart the system or turn off the power while this light is on.

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments