manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 187 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 187

5-55

Chapter 5:  SYSTEM SETTINGS BY SOFTWARE

5.9.2. Remote response group settings

Setting the remote response station group permits any station programmed for this function to respond to calls
to other stations within the group. 
Up to 16 stations can be preset.

[Creating new remote response group]

Step 1.

Click "Remote response group" tab to display the following screen.

Step 2.

Press "New" to create a remote response station group.
A new group column is added each time the button is pressed, permitting group registration of each
station.

Step 3.

Choose the stations to be configured into the group from the list.
Click the cell for the station to be selected so that it becomes checkmarked.
• Up to 16 stations can be programmed per group.
• A single station cannot be assigned to more than one group.

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments