manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 178 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 178

5-46

Chapter 5:  SYSTEM SETTINGS BY SOFTWARE

5.6.3. Speed dialing settings

Step 1.

Click "Speed Dialing" tab to display the following setting screen.

Available item differs depending on the type of stations.

Step 2.

Enter the station numbers to be called for each of the one-touch dial keys ([7], [8], [9] and [0] keys)
and the Off-Hook function. (IP master station only)

Tips

• Enter one-touch dialing programming using the Dial keys (12), Paging key, and/or Function key.
• Up to 20 digits dialing operation can be preset.
• To set keys other than the numerical keys listed above for speed dialing, enter these as follows:

[

] key

: #

[

] key

: *

Paging key

: P

Function key

: F

Step 3.

Enter the master station number to be called when the door station's call button is pressed. 
(IP door station only)

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments