manualshive.com logo in svg

Aiphone AN-8000EX, Operating Instructions Manual, Page: 167 / 244

Share
Download
Aiphone AN-8000EX Operating Instructions Manual Download Page 167

5-35

Chapter 5:  SYSTEM SETTINGS BY SOFTWARE

5.5.4. Audio I/O settings

Step 1.

Click on the Audio I/O tab. 
The corresponding setting screen is displayed.

Step 2.

Perform settings for each item of Audio I/O Ch 1 and Ch 2. 
Set how to use the Multi-interface unit's Audio input and output terminals. The following setting items
are provided in Audio I/O Ch1 and Ch2.  

(1) Input mode

Set the operation mode to be used. 
If "PBX interface" is selected, the output mode is also automatically set to the same contents.

PBX I/F:

Select this item when connecting the Multi interface to the PBX analog E&M
interface. 

Aux input paging: Select this item when connecting the Multi interface unit to playback components or

Remote microphone to make paging calls. Paging calls can be made to the
preprogrammed paging zones when the control input is activated. 

BGM:

Select this item when broadcasting BGM to the stations in standby mode by
connecting playback components. 

Unused: 

The audio input is not used. 

Summary of Contents for AN-8000EX





















































































































































































































































Reviews:

No comments