SWIR Line Camera Series User’s Manual
(OM150000013H-EN)
－
10
－
2-3
List of Camera System
To set the camera, following items are needed.
Camera
InGaAs sensor on board SWIR line camera
ABL-005IR, ABL-005MIR, ABL-005WIR, ABL-010IR
Mounting Adapter (Option)
If you need to mount the camera to tripod or others,
Attach mounting adapter to the bottom of camera housing.
ABL-005IR/ABL-005MIR/ABL-010IR : BVA-TB04
ABL-005WIR : BVA-TB03
C-mount Lens (Option)
Be sure to select the lens that meets right resolution and spectrum specification.
Network Card (Option)
Be sure to use a network card supporting Giga bps ethernet and jumbo frame.
Avaldata’s Model : ASB-1300T6, APX-3404
LAN Cable (Option)
Connecting RJ45 port of the camera, inputting and outputting image data & control
signals, and it is required to use a LAN cable higher than CAT5e.
If the camera is working in environment generating noises, it is recommended to use a
shielded cable.
Power Cable (Option)
Please use the power cable meeting its voltage level between DC +11V and 13V and
current level 1A or higher.
※
Power connector includes pins for GPIO wiring.
Select the frame grabber supporting Camera Link Base configuration.
Avaldata’s Model : ASB-1300T6, APX-3302, APX-3324A, etc.,
Frame Grabber (Option)
Camera Link cable provides transmission image data and communication of control
signal, and it may cause the error according to the operating environment or cable’s
quality or length.
CameraLink SDR Cable
(Option)
