ANET1553 Users Manual
19
3.1.4.3 Configure System Services
Click on the
Services
tab in the navigation bar. You will see now a page where you can
configure the services that shall be running on your ANET1553 module and also the
services that are currently running.
The ANS1553 basically offers an
‘endpoint’ or ‘service’ for applications which use the
AIM 1553 ApiConnectToServer
” call in order to establish a connection to a ANET1553.
That API function can either use the alias name or the IP address of an ANET1553
Note:
If the ANS1553 has been switched off, the 1553 API is no more able to connect to the
ANET1553 !
Figure 3-7 ANET Web Configuration Tool
“Services”
3.1.4.4 Configure the password and set the System Log-File formats
Click on the
Maintenance
tab in the navigation bar (see the figure below).
“System Logs” provides the system Log-Files in different file formats. The System
Status Log-Files are available in the HTML-, Plain- (ASCII-Text file) or XML-Format.
Note: For viewing the XML Log-Files a XML-Editor is necessary.
It is recommended to change the password
(default = “aim”) when using the ANET1553
module the first time.
3.1.4.5 Re-Boot or Shutdown over Ethernet
Click on the
Maintenance
tab in the navigation bar (see the figure below).
It is possible to reboot or shutdown (power down) the module over Ethernet using the
Reboot or Shutdown function in this Tab.
