AIGOSTAR 310000HGB, Instruction Manual

Page: 11 / 27

TROUBLE SHOOTING
Note: Do not attempt to replace a defective mains cord. The
appliance has to be returned to an authorized service center
for repair.
Problem Cause/Solution
Iron emits an
odor or smoke
Oils used during manufacture need to
be burnt off for about ten minutes, then
the odor will disappear. So it is normal
when it turns on for the first time use.
Iron does not
heat

Make sure the iron to be plugged into
a 220-240 Volt, AC electrical outlet
only.

Ensure the iron is on and power light
is illuminated.

Adjust the temperature knob to the
correct setting for your garment.
Iron does not
steam

Ensure water tank level is at least 1/4
full

Ensure steam knob is switched on

Press Shot of steam button several
times to prime
Spray function
does not work

The water tank must be at least 1/4
full. Fill the tank as described in the
section “How to fill the water tank”