9.
Raise or lower table top to desired height and tighten thumb wheels by turning clockwise to secure
(see fig. 15)
. Ensure height is the same on both sides; otherwise, table will not be level and not safe
for use.
10. To adjust height loosen thumb wheels anti-clockwise
(see fig. 16)
and repeat step 9.
ASSEMBLY INSTRUCTIONS (CONTINUED)
(fig. 15)
(fig. 16)
OPERATION INSTRUCTIONS
•
To adjust the height and/or angle of the table, first loosen the two short hands screws by turning
them anticlockwise. Adjust the table to suit and secure by turning hand screws clockwise.
•
The table is not load bearing and should not be used to support objects over 15kgs (33lbs).
•
Do not allow people to lean on the table.
WARNING: The Overbed Table requires a risk assessment before use.
WARNING: The Overbed Table must be checked periodically to ensure it is securely in place,
retighten as required.
WARNING: DO NOT overtighten the screws otherwise this will cause damage to table top.
WARNING. DO NOT EXCEED 15kg weight load.
CLEANING
All of the product components are manufactured from quality materials. However, it is very important
that you only clean your Over Bed Table using a non-abrasive cleaner or mild detergent with a soft cloth
avoid using lime scale remover. Abrasive cleaners or abrasive cleaning pads will seriously damage your
product beyond repair.
If to be disinfected by heat (apart from the wooden table top), one of the following three temperatures
and duration of exposure can be used:
a.
a temperature of 90°C for 1 minute
b.
a temperature of 85°C for 3 minutes
c.
a temperature of 80°C for 10 minutes
