4.
Align pre-punched holes
in bottom of H frame with
the pre-punched holes in
the spigots of the U frame.
Insert E-clips to lock in
position ensuring it clicks in
place and secure.
(see fig. 6 and 7)
5.
Place the L shape tube onto the underside of the table top, observing the following
(VERY IMPORTANT)
• The riveted end of L shape tube MUST be placed onto the underside of table top
(see fig. 8)
.
• The riveted end of L-Shape tube MUST be placed between pre-drilled holes nearest to the
edge of the table (approximately 10 cm from table edge).
(see fig. 9 and 10)
ASSEMBLY INSTRUCTIONS (CONTINUED)
(fig. 6)
(fig. 7)
(fig. 8)
(fig. 9)
(fig. 10)
