Usage and Maintenance Instructions
Ver. 2 07/2012 (2109)
2
INTRODUCTION
Thank you for deciding to purchase the Furniture Raisers from Aidapt. The Furniture
Raisers are manufactured from the finest materials available. When used correctly
they are designed to give many years of reliable, trouble-free service.
NB. This equipment must be installed by a competent person.
VG822 90 mm (3 ½”) - Set of 4
VG823 140 mm (5 ½”) – Set of 4
Maximum User Weight: 380 kg (60 stone) including furniture.
Do not exceed the weight limit stated – doing so could put the user at risk.
BEFORE USE
Carefully remove all packaging. Avoid using any knives of other sharp instruments
as this may damage the surface of the product.
Check the product for any visible damage If you see any damage or suspect a fault,
do not use your product, but contact your supplier for support.
INTENDED USE
Furniture Raisers are suitable for use with beds, chairs and other furniture on
castors or legs; they are simply placed under chairs or beds to raise the height.
The strong one-piece grey plastic elephant feet furniture raisers blend with most
furniture, while the extra wide top will support most types of furniture leg.
•
A central recess allows castors to be safely positioned for stability within
the raisers.
•
No additional fixing is required.
•
Supplied in a set of 4.
•
Available in two heights.
FITTING YOUR FURNITURE RAISERS
NB. Two people may be required to fit the Chair Raisers safely.
Lift the furniture and insert each leg into the central recess of the Furniture Raiser.
Carefully lower the furniture to the ground, checking that the leg/castor is securely
fitted into the recess and that the base of the Furniture Raiser is flat and level on the
ground before use.
