Aico Ei161RC Technical Specifications Download Page 1

 

 

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

 

 

Model 

Ei161RC 

 

Dual Ionisation chamber sensor 

 

Tamper proof rechargeable Lithium battery back-up 

 

Easi-fit base 

 

Remote Control capability 

 

Built in Test/Hush button 

 

Advanced suppression and calibration technology  

 

Interconnectable to other Ei mains powered alarms 

 

Low power cell warning 

 

Kitemarked to BS EN14604:2005 

 

5 Year Guarantee 

Product Description 

 

The Ei161RC is an Ionisation Smoke Alarm that runs on 230V AC 
mains power, and has built in tamper proof Lithium cells that act as 

a battery back up in the event of mains failure. These rechargeable 

Lithium cells are designed to have a ten-year life and outlast the life 

of the smoke alarm itself, whilst providing up to six months of 

smoke alarm operation without mains power. 

 
The alarm gives a fire warning when adequate smoke enters the 

alarm.  

 

The alarm is supplied with the Easi-fit base that allows very quick 

and simple installation of the smoke alarm, combined with simple 

alarm head removal and replacement. The Easi-fit base automatically 
connects both mains power and battery as the detector slides on. 

 

The alarm allows the detector to be controlled remotely by either a 

“Test, Silence and Locate” Switch (Ei1529RC) or a Manual Call Point 

(MCP401RC). If the alarm is also connected to other Ei ‘RC’ mains 
powered alarms then the whole system can be controlled remotely. 

Up to 20 alarms can be interconnected. 

 

The alarm has other advanced features such as built in circuitry to 

aid suppression of voltage transients and RF interference to further 

reduce the chances of false alarms under such conditions. 

 

 

Operation 

 

 

The green indicator will illuminate to show mains power is 
present 

 

 

The red indicator will flash every 40 seconds to show that the 
detector has performed an automatic self test 

 

 

The red indicator will flash rapidly to show an alarm condition 
for the alarm that has triggered 

 

 

The “Test/Hush” button will either silence false alarms (if 
briefly pressed) or to perform a self test (if pressed and held) 

 

 

In “Test” mode the alarm will perform a self test and sound the 
horn 

 

 

In “Hush” mode the alarm enters a ten-minute period of 
reduced sensitivity to overcome false alarm conditions. It will 

then automatically reset itself 

 

 

When interconnected to other Ei mains powered alarms, an 
alarm on one detector will trigger all other interconnected 

alarms (only the triggered alarm will flash a red indicator) 
 

 

The smoke detector will emit a beep every 40 seconds to 
indicate that the battery backup is depleted and needs 

recharging 

 

                      

 

 
 

Mains Powered 230V~ with 
Rechargeable

 

Battery Back-up

 

Ionisation Smoke Alarm 

&

 OE Our policy is one of continuous improvement.                                                                 Ei161RC  DataSht Rev2 08.11.10

 

We reserve the right to amend designs and specifications without prior notice.

        

 

 

 

Mile End Business Park, Oswestry, Shropshire SY10 8NN 

Tel. 0870 758 4000           Fax.  0870 758 4010         www.aico.co.uk 

Reviews: