manualshive.com logo in svg

AIC SB405-PV, User Manaul

Share
Download
AIC SB405-PV User Manaul Download Page 68

58

SB405-PV User Manual

Chapter 3.Hardware Settings

3�7�2 LEDs: 30 Bay

SAS PHY Link 
Status
(LEDA1 to 
LEDA8)

Blue (On)

Link up.

Blue (Blinking)

Activity is detected.

Off

Link down.

Expander Blink 
(LED31)

Blue (Blinking)

Expander is alive, 0.0833Hz (12 seconds 
per cycle)

Expander Heart 
Bit (LED33)

Blue (Blinking)

Expander FW is running

HDD Activity 
LEDs

Blue (On)

HDD is present.

Blue (Blinking)

HDD Activity is detected : 8Hz

HDD Locate : 0.5Hz

Off

HDD is not connected or the Power is 
off.

HDD Fault/
Status LEDs

Red (On)

Set by any of the following bits:
1. RQST MISSING
2. RQST FAULT

Red (Blinking)

Set by any of the following bits:
1. RQST CONS CHECK
2. RQST IN CRIT ARRAY
3. RQST IN FAILED ARRAY
4. RQST REBUILD/REMAP
5. RQST R/R ABORT
6. RQST INSERT
7. RQST REMOVE
8. PRDFAIL

Off

No control bit is set or set by any of the 
following bits:
1. RQST OK
2. RQST RSVD DEVICE
3. RQST HOT SPARE
4. RQST ACTIVE
5. DO NOT REMOVE
6. RQST IDENT
7. DEVICE OFF

Summary of Contents for SB405-PV





































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands