58
Chapter 5. BMC Configuration Settings
SB102-UR User Manual
5�2�4 LAN
LAN
DHCP IP
Support
LAN protocol
RMCP(V1.5)+RMCP+(V2.0) support
ARP
This function is implemented by BMC. (Default: Enable)
Enabled Authentications Administrator[Password]
Session timeout
1800s(default) + 10s(tolerance)
Multi session
Support Max 15 sessions simultaneously
Anonymous Login
Not Support
LAN Alerting
Support SNMP Trap
User account
Support 10 user account including USER ID 1-10
Cipher Suite Entry
Support 3 entry, Cipher Suite IDs: 1, 2, 3
5�2�5 System Event Log (SEL)
System Event Log (SEL)
Time Synchronization
Time stamping is a key part of event logging and tracking. SEL
timestamp need to be set through BIOS or System Management
Software. There are 3 scenarios that BMC would synchronize its Real
Time clock (RTC) with the host system:
• During system Power-on Self Test (POST), BIOS would wait BMC
function ready (approximate 120 sec.), then send the Set SEL Time
command with the current system time to sync RTC timer.
• In runtime, on every BMC reset, BMC will assert GPIO to generate
SMI to BIOS, then BIOS would send the Set SEL Time command
with the current system time to sync RTC timer.
• The BMC would automatically sync its RTC timer every 24 hours to
maintain the tolerance within 3sec, via issue a SMI to BIOS.
The Behavior when SEL
is full.
Single Entry Delete:
The Delete SEL Entry Command of IPMI is able to remove the
individual records.
SEL Entry for SEL overflow:
When SEL is about to fill, the last entry recorded would be a SEL
entry stating the SEL has overflowed. This entry gives the system an
indication that subsequent SEL entries were lost.
SEL Circle Log:
When SEL is full, the system will record an "overflow" message and the
oldest log is instead of a new one. And then it records an event for “SEL
full”.
SEL Clear:
When all events are captured by SMS tool, SMS tool is able to clear
SEL entry. After all events are cleaned, SEL agent will create a new
event for this action.
