16
Chapter 2. Hardware Setup
SB102-SP User Manual
2�7�1 Removing the HDD Backplane
Step 1
Detach the cables and hard disk drives from the backplane module.
Step 2
Release the module by shifting the hook.
Step 3
Dislodge the screws on the module.
Step 4
Lift the module upward to remove.
2�7�2 Installing the HDD Backplane
Step 1
Slide the module into the system.
Step 2
Secure the module into the system by shifting the hook.
Step 3
Fasten the screws to secure the module. and fastening the screws.
2�7 Removing and Installing the HDD Backplane Module
This information is provided for professional technicians only.