29
Chapter 3. Hardware Settings
29a BMC Console Port Select Header (J3)
29b BMC Console Port Select Header (J4)
34 Chassis Intrusion Header (JINTRUDER1)
35 BMC Buzzer Header (JBUZZER1)
36 SSI Front panel Header (JSSI1)
37 IPMB PMBus Header (JBMC_I2C1)
1 TX1
2 PJ_TX
3 TX5
Jumper default Pin-1 & Pin-2
1 RX1
2 PJ_RX
3 RX5
Jumper default Pin-1 & Pin-2
1 CHASSIS_OPEN_N
2 GND
1 +5V_S0
2 BMC_BUZZER
FP_HDR_PWR_LED 1
2 FP_PWR (+3V3_S5)
KEY (no pin) 3
4 HDR_CHASSIS_ID_LED
(+5V_S5)
FP_PWR_LED_L 5
6 ID_LED_OUT_N
HDD_LED_P (+3V3_S5) 7
8 SYS_HEALTH2#
HDD_LED_N 9 10 SYS_HEALTH#
FP_PWR_BTN_N 11 12 LAN1_ACTLED_PWR
GND 13 14 PHY1_LED0_N
SW_COLD_RST_N 15 16 BMC_I2C_08_SDA
GND 17 18 BMC_I2C_08_SCL
BMC_ID_IN_N 19 20 CHASSIS_OPEN
TEMP_SENSOR (NC) 21 22 LAN2_ACTLED_PWR
FP_NMI_BTN_N 23 24 PHY1_LED1_R
1 BMC_I2C_01_SDA
2 GND
3 BMC_I2C_01_SCL
4 NC
1
3
2
1
1
2
1
2
24
23
1
4
1
3
3-pin header for selecting
BMC console.
3-pin header for selecting
BMC console.
2-pin header for detecting the
chassis of being opened.
2-pin internal buzzer/speaker
header for BMC.
2x12-pin header for SSI front
panel cable.
4-pin power management
header for BMC.