AIC 12Gb/s SAS JBOD Series, User Manual, Page: 68 / 105

59
J4024-01 User Manual Chapter 4. BMC Configuration Settings
Please refer to Section 3.2
4�4 Connect Host to BMC by RS232
1. Type the “[” and it will show the IPMI serial interface.
Type in the command for logging in the interface.
#[sys pwd –u admin admin ]
It will response [OK]
Type in the command for checking the BMC default IP.
#[30 0 2 1 3 0 0]
It will respond [34 00 02 00 11 C0 AB 0B 0B]
4�3 Utility Setup on Host