AIC 12Gb/s SAS JBOD Series, User Manual, Page: 51 / 105

42
Chapter 3. Sub-system Configuration Setup J4024-01 User Manual
3�6�4 Implementation on SES Elements
Only the fields highlighted in green are supported.
3.6.4.1. Power Supply Element
(A) Power Supply Control Element
BYTE/BIT 7 6 5 4 3 2 1 0
0
COMMON CONTROL
SELECT PRDFAIL DISABLE RST SWAP Reserved
1
RQST
IDENT
Reserved
2 Reserved
3 Reserved RQST FAIL RQST ON Reserved
Field Value
RQST ON Please refer to section “SES Element Control Functions” for details.
(B) Power Supply Status Element
BYTE/BIT 7 6 5 4 3 2 1 0
0
COMMON STATUS
Reserved PRDFAIL DISABLE SWAP ELEMENT STATUS CODE
1 IDENT Reserved
2 Reserved
DC OVER
VOLTAGE
DC UNDER
VOLTAGE
DC OVER
CURRENT Reserved
3 HOT SWAP FAIL
RQSTED
ON
OFF
OVERTMP
FAIL
TEMP
WARN
AC FAIL DC FAIL
Field Value
ELEMENT STATUS
CODE
OK: No failure or warning conditions detected
CRITICAL: FAIL bit is set due to one or more failure condition
FAIL A failure condition is detected
RQSTED ON 1: On
0: Off for Disk Power Supply
OFF 1: Off for Disk Power Supply
0: On
AC FAIL A failure condition is detected
DC FAIL A failure condition is detected