background image

• Features/General Description of  Product

4

This Powered Subwoofer has been designed solely for the reproduction of 
the Superbass Range.

Easy to install and with user friendly operations, it can be simply connected 
to  an  existing  music  as  well  as  PA  system  to  enjoy  powerful  bass 
reproduction.

A single SWX-200P working with six to eight satellite speakers forms an 
ideal Business music system for an area up to 2400 sq. ft. (240 sq. mtrs.)

Housed in an elegant PVC coated wooden cabinet. Available in OAK and 
Black finish.

Vented Down-firing speaker System using an 8” high output LF driver.

Built-in 100W low distortion, direct coupled amplifier to produce powerful 
bass.

SWX-200P has two unbalanced independent inputs. One accepts signals 
of 200mV and the other accepts 1V signals.

Built-in fourth order electronic Low pass filter, with selection of 80 / 120Hz 
cut-off frequencies. The 80 / 120Hz crossover points  facilitates matching 
with any background or foreground speaker system.

Built-in  Subsonic  filter  to  keep  out  unwanted  noise  such  as  hum  and 
rumble, for protection of the speaker.

SWX-200P

Summary of Contents for SWX-200P













Reviews: