Ahuja DFX-16, Operation Manual, Page: 5 / 20

• Front Panel Controls & Features
1. INPUT Volume Control 5. SELECT Switch
For adjustment of the signal level For selecting the desired program
being fed to the effects processor. settings out of the 16 preset
effects algorithms available from
2. MIX Control
DFX-16.
For adjustment of the desired mix
of dry (unprocessed) & wet
6. POWER LED
(processed) signal level available The glowing of this LED indicates
at the output. At position 0, the that the effects processor is ON.
output signal comprises of only
7. VARIATIONS Switch
dry signal. In order to raise the
This rotary switch provides 16
level of wet signal, turn up the MIX
different preset variations of time,
volume control to a desired
depth or regeneration for any of
position.
the program selected.
3. OUTPUT Volume Control
For adjustment of the output
signal level from the effects
processor.
4. SIGNAL LED
The flickering of this LED indicates
the presence of acceptable levels
of input signal. But the continuous
glow of the SIGNAL LED indicates
that there is excessive signal
being fed to the input of the effects
processor, resulting in distorted
output.
5
DFX-16
SELECT VARIATIONS
POWER SIGNAL
18bit Digital Effects Processor
10 10 10 0 0 0
OUTPUT MIX INPUT
Rotary
Chorus/Rev
Flange/Rev
Delay/Rev
Delay
Flange
Chorus
Tremolo
Hall 1
Hall 2
Hall 3
Room 1
Room 2
Room 3
Plates 1
Plates 2
10
11
12
13
14
15
16 1 2
3
4
5
6
7
8
9
1 2 3 4 5 6 7