manualshive.com logo in svg

AHRI RenewAire SA Series, Installation, Operation And Maintenance Manual

Share
Download
AHRI RenewAire SA Series Installation, Operation And Maintenance Manual Download Page 17

17

1.800.627.4499

SA-Series

CORE ARRAY

5.3 SA SERIES ASSEMBLY PARTS

www.renewaire.com     (800) 627- 4499 

[email protected]

www.renewaire.com     (800) 627- 4499 

[email protected]

www.renewaire.com     (800) 627- 4499 

[email protected]

The parts needed to assemble the SA Series are depicted below for reference in the assembly 
process. Please see charts on page 9–12 for quantities provided for specific models.

FIGURE 5.3.0 BASE 

ASSEMBLY

FIGURE 5.3.1 BOTTOM/

MIDDLE CORE

FIGURE 5.3.2 TOP CORE

www.renewaire.com     (800) 627- 4499 

[email protected]

www.renewaire.com     (800) 627- 4499 

[email protected]

FIGURE 5.3.4 CONNECTOR 

BRACKET

FIGURE 5.3.5 CORE JOINING 

STRAP

www.renewaire.com     (800) 627- 4499 

[email protected]

www.renewaire.com     (800) 627- 4499 

[email protected]

FIGURE 5.3.3 1/2 CORE 

SUPPORT BRACKET

FIGURE 5.3.10 2 CORE 

SUPPORT BRACKET

www.renewaire.com     (800) 627- 4499 

[email protected]

FIGURE 5.3.12 ROOF 

ASSEMBLY

5.2 TOOLS NEEDED FOR ASSEMBLY

Battery Drill/Driver, #2 Phillips or Square Drive 
Drift Pins and C-clamp Pliers (2) 
Dead Blow Hammer, 4' Level 
7/16" and 9/16" Wrenches/Sockets 
Step Ladders, Multiple Heights

www.renewaire.com     (800) 627- 4499 

[email protected]

www.renewaire.com     (800) 627- 4499 

[email protected]

www.renewaire.com     (800) 627- 4499 

[email protected]

FIGURE 5.3.7 POST

FIGURE 5.3.8 

INSULATED 

PLENUM DIVIDER

FIGURE 5.3.6 WALL

www.renewaire.com     (800) 627- 4499 

[email protected]

www.renewaire.com     (800) 627- 4499 

[email protected]

FIGURE 5.3.9 1/2 CORE FACE 

PLATE PANEL

FIGURE 5.3.11 2 CORE FACE 

PLATE PANEL

INSTALLATION

Summary of Contents for RenewAire SA Series

























Reviews:

No comments

Brands by name

Popular brands

Load more brands