EN
2
1. introduction
• You have acquired a high-quality test adapter manufactured, which will enable you to
perform repeatable measurements for a very lang period of time.
• The adapter is designed to test function and electrical safety of charging stations
mode 3 for AC charging.
• This adapter allows you to conduct tests in combination with appropriate test
instruments like installation Tester and /or Scope Meters [oscilloscope].
• With this adapter, charging stations can be tested in accordance with IEC/EN62851-1
and IEC/HD 60364-7-722.
• Read this manual carefully to ensure the safe performance and function of the test
adapter.
• Ensure that the end user of this product receives this manual.
2. Symbols
CAUTION
Refer to the explanation in this manual.
WARNING
Hazardous Voltage, Risk electric shock.
The equipment is protected by double insulation or reinforced insulation.
Earthing [grounding] terminal.
Reference, please pay utmost attention.
Conformity symbol confirms compliance with the applicable European
directives. The requirements of the Low Voltage Directive with the relevant
regulations Standards are also fulfilled.
Symbol for marking of electrical and electronic equipment [WEEE Directive].
Summary of Contents for EVSE
Page 50: ...50 Notes ...
Page 51: ...Notes ...