14. Device configuration
67
14.7
Hysteresis
The hysteresis for an alarm triggered in the event of a limit value being exceeded
can be set generally for all sensors from 0 to 99 digits (default 10 digits) in the
Hysteresis
function (see 13.5 and Manual 6.2.7).
To modify hysteresis
(0 ... 99) see 9.5:
Hysteresis : 10
14.8
Operating parameters
Certain operating parameters can be configured by the user as software options
in the
function; (see Manual 6.10.13.2).
Change mains frequency noise suppression from 50Hz to 60Hz
Configuration: F-------
To delete all meas. values at the start of a measuring operation
Configuration: -C------
Ring memory
Configuration: --R-----
Immediate output via the interface, oversampling
Configuration: ----A---
Switch signal transmitter off
Configuration: -----S--
To program the configuration
press :
PROG
Configuration:
To select parameters press :
►
or
◄
To enable / disable parameters press :
▲
or
▼
-C------
