Ahlborn ALMEMO 2450-1L, Operating Instructions Manual, Page: 18 / 24

10. Measuring operations
18
Transducer Sensor / con-
nector Measuring range Units Abbre-
viation
Measured value of Mb1 any
MESS
Cold junction temperature any °C
CJ
TC=Temperature compensation
10.1.3
Double display
On all double sensors incorporating a temper-
ature sensor on the 1st channel the tempera-
ture value can at the same time be displayed
in the function field.
Select 2
nd channel
Activate temperature display
Press and hold dow M ▲
Return to channel display
Press and hold down M ▲
10.2
Peak value memory
From the measured values acquired for each
measuring point the highest and the lowest
values are continuously recorded. To display
these high/low peak values first the desired
channel must be set (see Section 7.1) and
then the
MAX
or
MIN
key must be pressed.
As a check the display also includes the asso-
ciated symbol.
To display the maximum value press key :
MAX
.
To display the minimum value press key : MIN .
To delete the maximum value press and hold down key :
MAX
.
To delete the minimum value press and hold down key :
MIN
.
To return to the measuring point display press key :
M ▲
.
As soon as you clear the memory, the current measured value will appear (be-
cause measuring is continuous).
10.3
Measured value memory
On the ALMEMO ® 2450-1L any measured
value can be saved. To save the measured
value press key :
MEM
.
The value most recently saved then appears in
the function field preceded by the symbol ´M´.
To return to the channel display press key :
M ▲
.