aguri Fusion GTX200, User Manual, Page: 10 / 96

EN • 10 EN • 11
GPS speed trap settings
The GPS speed trap settings, control alerts to the locations stored in the
Speedshield database that is pre-loaded in to your Fusion.
It is possible to individually switch alerts to these locations, on or off, to
suit your personal requirements. The following options are available:-
GPS Speed traps – On/Off
Red Light cameras – On/Off
High Risk Zone locations
– On/Off
SPECs average speed cameras – On/Off
Enter the menu by pressing the ‘Menu’ button. Scroll left or right, using
the ‘Dim’ (+) or ‘Mute’ (-) buttons, until you see the speed trap/red light
camera/high risk zone location/SPECs average speed camera setting
you want to change. Press the ‘City’ button to switch the setting on or
off and press the Menu button to confirm and return to the menu.
Quick start
When you power the device on, the unit will go through a start-up
sequence confirming the current status of the unit. The sequence will tell
you which features are on and off. If you do not wish to see this, you can
switch the ‘Quick start’ feature on.
Enter the menu by pressing the ‘Menu’ button. Scroll left or right, using
the ‘Dim’ (+) or ‘Mute’ (-) buttons, until you see ‘Quick start’. Press the
‘City’ button to select or de-select it and press the ‘Menu’ button to
confirm.
Software version
Select ‘I Vers.’ to confirm what version of the operating software is
currently installed on your device.
Enter the menu by pressing the ‘Menu’ button. Scroll left or right, using
the ‘Dim’ (+) or ‘Mute’ (-) buttons, until you see ‘Version’ and press the
‘City’ button. Press the ‘Menu’ button to return to the menu.
Change screen colour
It is possible to choose between three different screen colours, orange,
blue, and ‘All colour’.