OPERATING INSTRUCTIONS
AGT 1060
Rev.09/2020
80
Fig. 85
A.
Front hydraulic lift mechanism
, it is provided with a protection system consisting of
hoses for the protection of radiators and the engine cover and it can be fitted with a top
link, which is used for attaching the third linkage point, see description below.
B.
Weights
, for greater stability of the tractor,
C.
Hydraulic controls
, additional control devices on the left side of the tractor, allowing the
user to extend the range of hydraulic operating functions.
D.
Rotating lamp
, the orange rotating lamp warns other drivers to use caution.
E.
Working lamp
, it is used to illuminate the working area in poor visibility conditions. The
working lamps MUST NOT be used when driving on public roads.
F.
Cab
, it increases the operator's comfort when driving and protects the operator from
falling objects or in case of a tractor rollover.
G.
Rear hydraulic lift mechanism
, the three-point type mechanism enables quicker
attachment of different types of implements and is provided with several additional
equipment options for this purpose; see description below.
H.
Top link
, for hydraulic adjustment from the driver’s seat;
I.
Double-acting hydraulic lift cylinder
, for lifting and lowering the rear hydraulic lift
mechanism from the driver's seat.
J.
Vertical hydraulic tensioner
, for adjusting the height of the arm, which is used to
connect a tractor mounted implement. It can be controlled from the driver’s seat.
K.
Hydraulic pump
, you can install a pump with a capacity greater than 11cm³ and with an
additional oil radiator.
4.9.1
FRONT HYDRAULIC LIFT MECHANISM
The front lift mechanism is a three-point type mechanism with adjustable lower link arms and an
automatic hook for a category 1 ball connection.
The mechanism features a quick connection system and the lower link arms are automatically
fixed by means of a spring when attaching an implement.
The front hydraulic linkage is
equipped with quick couplings for
connecting the implement to the
hydraulic system. The operator is
able to use 2, 3 or 4 quick
couplings
on
the
hydraulic
mechanism.
For information on how to control
the front hydraulic lift mechanism,
refer to the chapter “Additional
control devices for the hydraulic
system with a front hydraulic lift
mechanism”.
Summary of Contents for AGT 106
