Agromehanika AGT 106, Operating Instructions Manual

Page: 231 / 245

OPERATING INSTRUCTIONS AGT 1060 Rev.09/2020
230
9.5 NOISE LEVEL
This table provides information on noise level, measured on the tractor under different operating
conditions. The values were measured in accordance with testing method, in compliance with the
guidelines of the Commission Delegated Regulation (EU) no. 1322/2014 – Annex XIII.
Description
No. of revolutions
(rpm)
Measured value (dB / A)
Tractor version with
the roll bar
Tractor version with
the cab
Sound level with the
tractor at standstill
1950 76.7 /
Sound level while
driving the tractor
1950 77.4 /
Sound level at the
driver's area
1950 85.8 /
9.5.1 VIBRATIONS ON THE DRIVER
The seats on the tractor are designed in compliance with the requirements of the Category A,
Class II/III.
The measured vibration values for seats used in your tractor model are provided in the following
table and comply with the Regulation (EU) no. 1322/2014 - Annex XIV and its subsequent
amendments.
Seat model / type Vibrations* (weight)
Lightweight driver Heavyweight driver
COBO SC84-M200 1.24 m/s² (4.07 ft/s²)
1.1 m/s² (3.61 ft/s²)
* Vibrations in relation to weight and acceleration.
9.6 TRACTOR INCLINATION
The table shows the static stability of the tractor with lateral inclination. The tests were
conducted without equipment and weights installed, with the tractor stopped diagonally on a
sloping surface.
Description Measured value (ɑ)
Tractor in
inclined
position
(lateral
stability)
Tyres Tyre width /
diameter (mm)
Tractor
wheelbase
(mm)
Tractor
version with
the roll bar
Tractor
version with
the cab
Slipping /
Rollover /
WARNING: When the tractor is continuously used over an extended period of
time, hearing protection must be used to reduce the sound level at the operator’s
area.
WARNING: The tests cannot replicate the conditions in the environment.
Therefore, the values in the table are only used as static guidelines and are not
considered as a safe limit value for working without the risk of rollover!