Agromehanika AGS 2500 EN-HP, Instructions For Use Manual, Page: 123 / 131

AGS 2500/3000 EN-HP USER MANUAL – rev.2016/12
page
113
15.1 Nozzle types in farming
15.1.1 Nozzle types with a flat jet
This kind of nozzles is principally used for spraying with
herbicides, insecticides and fungicides. The insecticide is
precisely distributed along the whole working range of the
nozzle. At lower pressure, the drops are bigger and less
sensitive to wind and vice-versa. The recommended
working height is 0.5 meter above the crop.
For reasons of correct overlapping of the jets, the nozzle adjustment is very important. The
nozzles must be offset for 5°-10°according to the equipment.
15.1.2 Whirl nozzles
Recommended working pressure:

Herbicides: 1.5-3 bar

Fungicides: 3 -5 bar

Insecticides: 3 -5 bar
The jet of such nozzles in formed like a rotating cone. They consist of a
whirling and a spraying part.
The main characteristic of these nozzles are smaller drops, the
insecticide distribution is worse. They are suitable for spraying with
fungicides and insecticides.

Recommended working pressure: 2 - 10 bar

Recommended working height: 0.5 meter.