INSTRUCTIONS FOR USE
AGP 1000 – 2000 PRO
Rev.02/2019
50
10.4.6
Diverter valves
Figure 10.9
Solenoid diverter valve. The solenoid coil is
operated through the control panel, which is
installed inside the tractor cab (remote
control). The valve features a robust design
and can be used with operating pressures of
up to 40 bar. Its structure is designed to
enable a remote supply of one or two
connections:
•
(1) distribution line for supplying the
spraying nozzles on the blower,
•
(2) the connection for direct flow with
optional manual opening/closing
through a ball valve.
10.5
Adjusting the regulator for operation
•
Always use clean water to perform adjustments.
•
Calculate the necessary driving speed according to spray volume per hectare and flow rate
of the mist blower.
•
Adjust the required tractor rpm speed according to the calculated driving speed and be
careful to ensure the required speed (450 rpm) or maximum number of revolutions of the
PTO drive shaft (540 rpm).
10.5.1
Manual pressure regulator (PR8F/2EC)
Figure 10.10
•
Through the control panel for
remote operation (4.1) open
the diverter valves supplying
the spraying nozzles (4) and
the ball valve (6) for mixing.
•
Manually adjust the desired
value on the control valve (1).
