AG-tronik M1 AND REGULATOR PR-9
INSTRUCTIONS FOR USE – rev. 2017-04
27
Speed constant was calculated with the equation above. This is input in AG-tronik. In speed
constant menu choose line NEW CONSTANT and press key
to open the following
window:
Figure 35
Figure 36
If you wish to input value change, press key
. Value starts to blink. Use keys
and
to set new value and confirm it with key
.
Use button
to return to basic image of menu "SPEED CONSTANT".
Parameters r, N:
Sub-program parameters r, N enables input of parameters without having to calculate the
constant beforehand. Simply input parameters r and N, and AG-tronik will calculate the
constant.
In speed constant menu select line PARAMETERS r, N and press key
to open the
following window:
Figure 37
Display shows current value of imp/km, distance r and marks N. Distance r is in frame and if
you want to change it, press button
and value starts flashing. Use buttons
and
to set new value and confirm it with button
.
