Agrisem DS1100, User Manual

Page: 38 / 49

38
3.2. SERVICING - MAINTENANCE
Comply with the safety instructions regarding servicing and maintenance. Your machine is designed
and constructed for maximum yield, profitability and comfort under many different usage conditions.
Your machine has been checked at the factory and by your dealer before its delivery to ensure that
you receive a machine in perfect condition. To maintain it in good working condition, it is important that
servicing and maintenance operations are performed at the recommended frequency.
In order to ensure your machine always operates correctly and to obtain optimum performance, you
must clean and maintain it at regular intervals. The hydraulic components and bearings must not be
cleaned with a high-pressure washer or directly hosed down. The units, screwed connectors and
bearings are not watertight to VERY high pressure cleaning.
3.2.1. Servicing frequency
The servicing frequency is determined by various factors. Thus, different usage conditions, the
weather, driving and working speeds, dust and the type of soil, etc. affect the frequency, and the
lubrication and maintenance products used also determine the time until the next servicing work is
required.
The servicing frequency indicated is therefore only to be used as a reference. If you deviate from the
normal conditions of use, you must adapt the frequency at which this maintenance and servicing is
carried out to suit the conditions:
1/ After the first 10 hours of use:
- Check the tightness of the nuts and screws
- Check the hydraulic system (tightness and sealing)
- Check the tightness of the wheels
- Perform a complete diagnosis of the machine to ensure there are no elements
causing problems
- Clean the soil off the machine
2/ Every 50 hours of use
- Check the tightness of the nuts and screws
- Check the hydraulic system (tightness and sealing)
- Check the tightness of the wheels
- Perform a complete diagnosis of the machine to ensure there are no elements
causing problems.
- Lubricate the joints with greasers
- Clean the soil off the machine