Agrisem DS1100, User Manual

Page: 11 / 49

11
2. WARRANTY CONDITIONS
The warranty conditions applicable to machines fitted exclusively with genuine spare parts from
AGRISEM INTERNATIONAL - 535 Rue Pierre Levasseur CS 60263
– 44158 ANCENIS CEDEX,
France, are as follows:

DURATION

If a defect is observed on a structural part within a period of 6 months as from the date of delivery
of the machine, and if this defect is due to faulty raw materials, or its manufacture at the factory.
The parts presumed to be faulty must be returned to the address of the Company for expert
inspection.
The following shall be considered proof of the date of delivery of the equipment:
-
the date of the delivery slip and the purchaser’s invoice.
- the return of the warranty certificate within 15 days (with dealer's and pu
rchaser’s stamp and
signature) following delivery of the equipment.

MACHINES AND PARTS CONCERNED

For the purposes of this warranty, the term “Machine” is exclusively used to designate machines
and parts manufactured by AGRISEM INTERNATIONAL. (It does not include external
components, in particular tyres, hydraulic hoses, etc. even though these parts are also supplied by
the Company)

The warranty is void if any modifications have been made to the machine without
the formal agreement of AGRISEM INTERNATIONAL or if parts other than those
manufactured by the Company have been fitted (e.g. counterfeit wear parts).

EXTENT OF THE WARRANTY

The warranty is limited to the reimbursement or repair of parts recognised as faulty with regard to
the raw material or machining, in our factories by our Technical Departments.

Any costs linked to dismantling and replacement of the faulty part are not covered by the warranty.
The cost of transporting machines or machine parts to the place of repair and their return to their
owner is not covered either.

Wear parts are not covered by the warranty.

PRECONDITIONS
The machine must be maintained and used in compliance with the instructions in this User Manual.
All the safety measures described in the User Manual and in the manuals of any additional equipment
must be complied with.
All the protection and safety elements, and dangerous parts (e.g. shock absorbers, etc.) must be
inspected regularly and replaced if necessary.
The warranty is only valid if the customer has satisfied the general obligations of the contract, in