manualshive.com logo in svg

Agrisem 5 Series, User Manual, Page: 78 / 130

Share
Download
Agrisem 5 Series User Manual Download Page 78

User manual - Maximulch - Series 3 | Series 5 | Series 6

Operation

78

NOTT-GB-708-A

06/12/2019

6.12. Adjusting the clod-breaking board

For Maximulch Series 3 machines only

Some Maximulch models may be fitted with a clod-

breaking board (1).
The clod-breaking board is located between the two 

rows of discs. It is designed to break clods.

The  adjustment  of  the  board  may  be  fine-tuned 

according to the conditions of use.
1 -  Remove the screws (2) at each end of the board.
2 - 

Set the deflector to the required position.

3 -  Retighten the screws (2).

NOTT-0296

1

2

Fig. 75

 

6.13. Adjusting the border spreading disc

For Maximulch Series 3 machines only

The machine can be fitted with a border spreading 

disc to prevent a ridge forming when working.

NOTT-0297

Fig. 76

 

The border spreading disc must be folded for 

transport.

NOTT-0302

Fig. 77

 

Summary of Contents for 5 Series



































































































































Reviews:

No comments