8
8.
Multiple plugs and extension cables must not be overloaded.
9.
The cable of the mill must not be allowed to hang over the edge of the table
or work surface. Any contact with hot plates or any other sources of heat
must be strictly avoided at all times. surfaces must be avoided
10.
Leads to electrical appliances must not be laid or squashed over sharp edges
or moveable parts
11.
Appliances must only be operated with the intended switches.
12.
Safety devices must not be modified or turned of
13.
Should any disturbances occur immediately turn the appliance off and
disconnect the plug.
14.
Do not disconnect the plug from the mains socket by pulling on the cable.
15.
Only ever operate the mill on a flat, stable surface. The mill must be
positioned so that slipping of the mill itself or the flour container during the
milling process cannot occur. It is best to place the mill on a firm surface,
(such as a kitchen worktop). This will ensure that the ventilation slots on the
underside of the mill, which serve to ventilate the motor, remain free.
16.
Strict monitoring of the appliance is essential when being used by children.
17.
Strict monitoring of the appliance is essential when being used in the vicinity
of children.
18.
Never operate the mill unless under supervision.
19.
Always keep the mill out of the reach of children
20.
The appliance must not be operated by persons with either physical or
mental handicaps or those who do not have sufficient knowledge of the safe
operation of the appliance. The exception to such operation of the
appliance is when used under supervision of persons responsible for the
safety of any handicapped persons
21.
Never immerse the mill or parts of the same into water or other liquids.
Never connect a wet plug to the mains socket or touch it if your hands are
wet.
22.
Any screw fittings (except locking device) which require a screw driver to
open must not be opened.
23.
Industrial motors can be damaged by longer periods of idle running. After
Use, please always turn the motor off immediately.
