20
Problem Solutions
Problem
Cause
Solution
Motor is blocked
and cannot be
switched on
Mill was adjusted in
still stand mode from
„coarse „to „fine”
although whole grain
kernels were between
the millstones.
Reset the mill to a coarser
setting and then adjust slowly
to a finer setting
Grain was too damp
Dry grain
Grain was milled too
finely
Adjust the mill to a coarser
setting – especially when
milling oily grain such as rye
Especially small grain
kernels e.g. Quinoa
were processed
Fill very small grain kernels
slowly by hand into the
hopper.
Milling stones are
smeared
Grain is too damp or
has a too high oil
content
Dry damp grain or/and mill at
a coarser setting. Grain with
a high oil content smears
very easily – use a coarser
setting
If nothing helps
Before returning the mill for repair, contact our customer services
department, maybe they will be able to give you helpful advice.
Tel. 0043 6245 83282 – Email: [email protected]
