Agrio Gigant, Instruction Manual

Page: 68 / 96

Regardless of whether the sprayer is equipped with a standard nozzle spacing of 50 cm or with a
spacing of 25 cm, nozzles and application tubes with a spacing of 25 cm, 50 cm or 75 cm can be
used on request, depending on the manufacturer and type of drag tube.
When installing the application, note the following
s hoses:
-
the correct choice of dosing disc (see dosing table of various manufacturers)
- correct seating of the metering disc in the seal.
- the tightness of all joints
15.2 Parallel drive / SECTION control during application
See ISOBUS terminal instructions
15.3 Exterior cleaning with high pressure gun
If the sprayer is equipped with a high-pressure gun, the unit can be hosed down with clean water
after working on the untreated surface.
Fig. 15/2 Description of external cleaning of the sprayer
1
Drum
2 Hose
3 High pressure gun
4 High pressure gun holder
1
2
3
4