background image

Agriframes, Journal house, Hartcliffe Way, Bristol, BS3 5RJ 

Orderline: 0117 934 1790 Fax: 0117 934 17 91 

Order on-line: www.agriframes.co.uk

 

 

 

Product code:  

30546-TBK 

Description:   

Classic Round Gazebo Matt Black 1.8m 

 

 

 

 

 

 

 

 

Quantity 

Component 

16 

Uprights with one reduced end 

Top Curves -1/4 Circle with straights (one reduced end) 

Top ½ Circles with short Straights (two plain ends) 

Stafford Hoop Halves (two plain ends)  

16 

Spacer Bars with Ring Clamps 

Hole Maker 

Quantity 

Optional Component 

Lattice Panels (4 x 3) 

64 

Reusable Cable Ties 

Code 

Description 

Drawings 

Quantity 

 

Spare Grub screws (in a separate bag) 

 

24 

AGR-A610/40 

5/8" Moisture Seal Black 

 

24 

AGR-A610/05 

3/4" End Plug Black 

 

16 

AGR-A70/006 

3mm Allen Key 

 

AGR-A622/03 

3/4”x3/4” Parallel Clamp (in 2 halves) 

 

12 

AGR-A74/002 

M4 x 20mm Socket Cap Head Screw St/Steel 

24 

AGR-A72/001 

M4 Hexagon Full Nut Stainless Steel 

24 

AGR-A75/000 

M4 Form A Washer St/Steel 

24 

Please read the assembly instructions carefully prior to construction.  

Tips: 

Before positioning the Spacer Bars on the uprights, half screw in the grub screws to the Ring Clamps on the Spacer Bars, to 
reduce the risk of losing the screws.  

Once correctly positioned tighten the grub screw to secure the spacer bar to the uprights. 

Positioning of the Spacer Bars 

In many cases the position of the horizontal bars is down to personal preference. However, if you have the lattice option you 
will need to leave the correct distance between bars.  

Lattice Panel Option 

For illustrative purposes we have only shown one side fixed with the lattice panels. Attach panels to both sides as you proceed.  

Issues:

 

If you are experiencing any issues with your Agriframes product please contact our customer services team on 0117 934 1790 
and quote your order reference.   
WARNING: Contains small parts, tools and plastic bags. Keep children away until the unit is assembled and everything is cleared 
away. 
NOTE: The card, paper sack, and polythene bags are recyclable - please dispose of carefully.  
MISSING PARTS PROCEDURE: Please call our customer service team on 0117 934 1790 and quote your order reference and 
quote the missing part. E.g. ASO-----, 2 uprights missing.

 

Summary of Contents for 30546-TBK

Page 1: ...uction Tips Before positioning the Spacer Bars on the uprights half screw in the grub screws to the Ring Clamps on the Spacer Bars to reduce the risk of losing the screws Once correctly positioned tighten the grub screw to secure the spacer bar to the uprights Positioning of the Spacer Bars In many cases the position of the horizontal bars is down to personal preference However if you have the lat...

Page 2: ...s 41 from the other spacer bar Repeat this process until there are 4 sets of full curves created Step 2 Using 4 Parallel Clamps connect the Top circles together as shown in Figure 2 The easiest way to ensure that the full curves are connected evenly is to have one or 2 people align the curves to form the shape shown in figure 2 with the straight part of the curve resting on the floor Once the curv...

Page 3: ...djust as necessary the clamps positioning on the Top Circles refer to Figure 1 and tighten the clamps Step 4 Move the Gazebo top to where the structure will be installed and firmly push the structure into the ground to make an impression or mark in the ground These impressions indicate where the uprights need to be inserted Step 5 Using the Hole Maker make holes 15 deep where you have marked the g...

Page 4: ...s above the lower Spacer Bar Also check the positioning of the Spacer Bars on the Gazebo top as shown in Figure 6 Step 7 Lift the constructed Gazebo top onto the uprights then cover the joins with moisture seals You will need at least 2 people for this step due to the weight of the Gazebo top Step 8 Reposition the Stafford Curves Loosen the Parallel Clamp Joint lower the Stafford Curves until the ...

Reviews: