Agrident APR250 User Manual Download Page 44 | Manualshive

Page: 44 / 49

Agrident APR250 User Manual Download Page 44

APR250 User Manual

24/03/21

Page 44 of 49

7.7.5.1 Show Battery Info

When fully charged, the battery info show

s ‘

100%

’.

Below  the  charging  indication,  the  display  shows  rough
estimates  concerning  the  remaining  operating  time  in
standby  mode  (APR250  running  but  RFID  engine  is  off),
here 22 hours, and in continuous read mode, here 7 hours
and 10 minutes.

In this example the battery capacity is at 57 percent. The
expected standby time is 12 hours and in continuous read
mode there are 4 hours left.

Bluetooth is activated in this example; this is also included
in the calculations. So, the shown expected battery life
considers all electric consumers that are currently active.

Details concerning the battery symbol in status bar are explained in chapter 4.1.2.1.

7.7.5.2 Show Firmware Info

The item ‘

Show Firmware Info

’ displays the readers

firmware version plus some additional information like build
date and bootloader version. You should have that
information available in case of a support request.

7.7.5.3 Show Hardware Info

The ‘

Hardware Info

’ shows the readers serial number and

the revision of the printed circuit board that is built into the
device. You should have that information available as well
in case of a support request.

7.7.5.4 Noise Monitor & Timing Monitor

These menu items are for support- and service purposes only.

«
...
42
43
44
45
46
...
»

Summary of Contents for APR250


















































Reviews:

No comments